11 how can i use edonkey behind my d-link router – D-Link DI-634M User Manual
Page 75
75
DI-634M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 7: Click Apply and then click Continue.
Step 8: Run PCAnywhere from the remote site and use the WAN IP Address of the
router, not your computer´s IP Address.
11 How can I use eDonkey behind my D-Link
Router?
You must open ports on your router to allow incoming traffic while using eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to.
4663 (TCP) *Used with the command line (CLI) client when it is configured to allow
remote connections. This is the case when using a Graphical Interface (such as the
Java Interface) with the client.
Step 1: Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Step 2: Click on Advanced and then click Firewall.
edonkey
4665
4661