D-Link DI-634M - Manual (Page 15)

15
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Capable of Packet Bursting, FastFrames, Compression, and
no Turbo mode.
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with
non-Turbo (legacy) devices. Dynamic Turbo mode is only
enabled when all nodes on the wireless network is Super G
with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with
non-Turbo (legacy) devices. Static turbo mode is always on
and is only enabled when all nodes on the wireless network is
Super G with Static Turbo enabled.
Choose Enabled to broadcast the SSID across the network.
All devices on a network must share the same SSID (Service
Set Identifier) to establish communication. Choose Disabled if
you do not wish to broadcast the SSID over the network.
Select Open System or WPA-PSK authentication.
Wired Equivalent Privacy (WEP) is a wireless security protocol
for Wireless Local Area Networks (WLAN). WEP provides
security by encrypting the data that is sent over the WLAN.
Select Enabled or Disabled. Disabled is the default setting.
(Note: If you enable encryption on the DI-634M make sure to
also enable encryption on all the wireless clients or wireless
connection will not be established.)
Select the level of encryption desired: 64-bit, or 128-bit.
Select HEX or ASCII.
Input up to 4 WEP keys; select the one you wish to use.
Super G without
Turbo:
Super G with
Static Turbo:
Super G with
Dynamic Turbo:
SSID Broadcast:
Authentication:
Key Type:
WEP Encryption:
Keys 1-4:
WEP: