Fronius Selectiva 8 kW - Manual (Page 45)

43
EN
Technical data
Selectiva 8 kW
Cable lengths must not exceed 30 m (98 ft. 5.1 in.).
WARNING! An electric shock due to a fault current can be fatal. Nothing other
than a type B residual current circuit breaker should ever be used for connecting
the device to the mains.
Mains voltage (-10% / +15%) *
Optional: 3~ NPE 400 / 230 V / 50/60 Hz
3~ PE 400 / 230 V / 50/60 Hz
Mains fuse protection ** 16 A
Minimum mains cable cross section 2.5 mm² (0.003875 in²)
Duty cycle 100%
EMC device class B
Protection class Protection class 1
Degree of protection *** IP 20
Overvoltage category III
Operating temperature **** -20 °C to +40 °C
(-4 °F to 104 °F)
Storage temperature -25 °C to +80 °C
(-13 °F to 176 °F)
Relative humidity maximum 85%
Maximum altitude above sea level 2000 m (6561 ft.)
Mark of conformity according to rating plate
Product standard EN62477-1
Dimensions l x w x h 633 x 180 x 344 mm
(24.92 x 7.09 x 13.54 in.)
Weight (with standard mains cable and charger
lead) 23 kg (50.71 lb.)
Pollution level 3
*) The device is approved for operation on neutral-earthed mains networks with a
maximum outer conductor nominal voltage of 400 V.
**) If the charger is protected by a 32 A fuse, the thermal stress of the automatic circuit
breaker must not exceed 82000 A²s.
The earth leakage current is less than 3.5 mA.
***) For indoor use only, do not expose to rain or snow
****) A high ambient temperature may result in a power reduction (derating)
Device-specific data
Device
Max. AC cur-
rent Max. AC power Charging volt-
age
Charging cur-
rent
Selectiva 2100 11 A 3900 W 24 V 100 A
Selectiva 2120 12.5 A 4600 W 24 V 120 A
Selectiva 2140 14.5 A 5400 W 24 V 140 A
Selectiva 2160 10 A 6100 W 24 V 160 A
Selectiva 2180 11 A 6800 W 24 V 180 A
Selectiva 2200 11 A 6900 W 24 V 200 A