Fronius Selectiva 8 kW - Manual (Page 23)

21
EN
Statistics mode In statistics mode, horizontal bars display
the frequency of the following device opera-
ting statuses:
-
Idle
- Charging
- Conservation charge
- Cooldown
- Error
Page 2/2 shows the following values:
-
Total number of charges
- Total Ah output
- Average Ah output per charge
- Total energy consumed (kWh)
- Average energy consumed (kWh) per
charge
The consumed energy display is a standard value and can deviate by up to 5% from the
actual amount of energy. At lower power levels the deviation may be higher.
History mode History mode provides information about the parameters for all the stored charging pro-
cesses. In order to show changing or different displays, two versions of the display window
are shown below:
Change from all other modes to the menu selection as follows:
Press the "Menu" key briefly
To select the desired mode:
Use the "Up/Down" keys to select the symbol for the desired mode
-
e.g. the battery symbol for standard mode
Use the "Stop/Start" key to confirm the "Tick" symbol
1
2
3
Use the "Up/Down" keys to toggle between page 1/2 and page 2/2
1