Foxconn 661FX7MI-RS - Manual (Page 52)

45
Chapter 3 BIOS Description
PnP/PCI Configurations
PnP/PCI Configurations Menu
v Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on.
v Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select “Manual” and manually adjust interruption resources in
the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
v IRQ Resources
Press the key, then manually set IRQ resources.
v PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn