Foxconn 661FX7MI-RS User Manual
Page 49
Chapter 3 BIOS Description
42
v
Video Off Method
This option is used to define the video off method. “Blank Screen” mode
means that after the computer enters power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the “V/H SYNC + Blank” mode the vertical and horizontal
scanning movement of screen stops when the computer enters power
saving mode. “DPMS Supported” mode is a new screen power management
system, and it needs to be supported by the monitor you’re using.
v
Switch Function
This option is used to enable or disable switch function to wake up.
v
MODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
v
Hot Key Function As
The option is used to define the hot key function.
v
HDD Off After
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode.
v
Power Button Override
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When “Instant Off” is selected, press the power switch to immediately turn off power.
W hen “Delay 4 Sec” is selected, press and hold the power button for four
seconds to turn off power.
v
Power State Resume Control
This option is used to control power resume state.
v
PM Wake Up Events
Press enter to set the items of PM wake up Events.
v
Delay Prior to Thermal
This option is used to set the delay time before the CPU enters auto thermal
mode.
PDF 文件使用 "pdfFactory" 试用版本创建