Foxconn 661FX7MI-RS - Manual (Page 45)

Chapter 3 BIOS Description
38
v Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O address
and interrupt request(IRQ).
v Parallel Port Mode
This item is used to assign data transport protocols of parallel port.The avail
able option: SPP, EPP, ECP, ECP+EPP and Normal. Normal mode supports
data output only; ECP and EPP mode support data input and output in bidirec
tional mode,but they just fit known ECP and EPP devices.
v ECP Mode Use DMA
Select a DMA Channel for the parallel port when using the ECP mode. This
field is configured only if Parallel Port Mode is set to ECP.
v Init Display First
This option is used to set which display device will be used first when your PC
starts up.
v USB0/1/2/2.0 Access Interface
This option is used to set USB0/1/2/2.0 Access Interface.
v MAC Access Interface
This option is used to set MAC access interface.
v Audio Access Interface
This option is used to set audio Access Interface.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn