Foxconn 661FX7MI-RS User Manual
Page 50

43
Chapter 3 BIOS Description
v
IRQ [3-7,9-15], NMI
This option is used to enable or disable IRQ[3-7,9-15], NMI.
v
IRQ 8 Break Suspend
This option is used to enable or disable IRQ8 break suspend.
v
RING Power Up Control
If this option is enable, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an in-
stalled fax/modem. This function needs to be supported by the relevant hard-
ware and software.
v
MACPME Power Up Control
This option is used to enable or disable the system to be waken up by onboard
LAN.
v
PCIPME Power Up Control
This option is used to enable or disable the system to be waken up by PCI
card.
v
PS2KB Wakeup from S3
This option is used to set which action will wake up PS/2 keyboard from S3
status. The setting values are Any Key, Hot Key, Password.
v
PS2MS Wakeup from S3
This option is used to set which action will wake up PS/2 mouse from S3
status.
v
Power Up by Alarm
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.
PM Wake Up Events Menu