Foxconn 6497MC-RSH - Manual (Page 51)

Chapter 3 BIOS Description
45
Load Optimized Defaults
Load Fail-Safe Defaults
Press to select this option. A dialogue box will pop up that allows you to
load the default BIOS settings. Select and then press to load the
defaults. Select and press to exit without loading. The defaults set
by BIOS set the basic system functions in order to ensure system stability. But if
your computer cannot POST properly, you should load the fail-safe defaults to
restore the original settings. Then carry out failure testing. If you only want to
load the defaults for a single option, you can select the desired option and
press the key.
Select this option and press , and a dialogue box will pop up to let you
load the optimized BIOS default settings. Select and then press to
load the optimized defaults. Select and press to exit without loading.
The defaults set by BIOS are the optimized performance parameters for the
system, to improve the performance of your system components. However, if
the optimized performance parameters are not supported by your hardware
devices, it will likely cause system reliability and stability issues. If you only want
to load the optimized default for a specific option, select the desired option and
press the key.
Set Supervisor/User Password
The access rights and permissions associated with the Supervisor password are
higher than those of a regular User password. The Supervisor password can be
used to start the system or modify the CMOS settings. By default, the option “Set
User Password” is displayed in gray and can be activated only when users
assign the Supervisor password. The User password can also start the system.
While the User password can be used to view the current CMOS settings, these
settings cannot be modified using the User password.
When you select the Set Supervisor/User Password option, the following message
will appear in the center of the screen, which will help you to set the password:
Enter Password:
Enter your password, not exceeding 8 characters, then press . The
password you enter will replace any previous password. When prompted, key in
the new password and press .
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn