Foxconn 6497MC-RSH - Manual (Page 44)

Chapter 3 BIOS Description
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
37
v Video Off Option
This option is used to set video off option. The setting values are: Always On,
Suspend -> Off.
v Video Off Method
This option is used to define the video off method. “Blank Screen” mode
means that after the computer enters into power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the “V/H SYNC + Blank” mode the vertical and horizon-
tal scanning movement of screen stops when the computer enters power
saving mode. “DPMS Support” mode is a new screen power management
system, and it needs to be supported by the monitor you’re using.
v Switch Function
This option is used to enable or disable switch function to wake up. The
setting values are Disabled and Break/Wake.
v MODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The setting
values are: NA, 3, 4, 5, 7, 9, 10, 11.
v Hot Key Function As
The option is used to define the hot key function. The available setting values
are Disabled, Power off and Suspend.
v HDD Off After
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are Disabled and 1 Min -15 Min.
v Power Button Override
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When “Instant Off” is selected, press the power switch to immediately turn
off power. When “Delay 4 Sec” is selected, press and hold the power button
for four seconds to turn off power.
v Power State Resume Control
This option is used to control power resume state. The available setting val-
ues are Always Off, Always On and Keep Pre-State.
v PM Wake Up Events
Press to set the items of PM Wake Up Events.
v Delay Prior to Thermal
This option is used to set the delay time before the CPU enters auto thermal
mode.