Foxconn 6497MC-RSH User Manual
Page 47
Chapter 3 BIOS Description
41
PnP/PCI Configurations
PDF 文件使用 "pdfFactory" 试用版本创建
v
Init Display First
This item is used to set which display device will be used first when your PC
starts up. The available setting values are: PCI Slot and PCIEx.
v
Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time the machine is turned
on. The setting values are Disabled and Enabled.
v
Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PNP, then select Auto (ESCD) and the BIOS will automatically
distributes interruption resources. If the ISA cards you installed not support-
ing PNP, you will need to select “Manual” and manually adjust interruption
resources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
v
PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are Disabled and Enabled.
v
Maximum ASPM Supported
Control maximum level of ASPM supported on the given PCI Express links on
the system.
PnP/PCI Configurations Menu