beautypg.com

Foxconn Q9657MC-8KRS2H V1.1 User Manual

Page 37

background image

Chapter 3 BIOS Description

31

v

PWRON After PWR-Fail

This option is used to set what action the PC will take with the power
supply when it resumes after a sudden power failure.

v

Wake- up by PCI card
This item is used to set the system to wake up by PCI card.

v

Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software.

v

USB KB Wake-Up From S3
This item is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode.

v

Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off.

v

Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up date.

v

Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up time.

PCI Express PM Function Menu

v

PCI Express PME
This item is used to set whether the system can be waked up by PCI Express
PME.

PDF 文件使用 "pdfFactory" 试用版本创建

Æ

Æ

www.fineprint.com.cn

This manual is related to the following products: