Foxconn 865M01-G-6ELS - Manual (Page 58)

Chapter 3 BIOS Description
50
865M01G/PE/GV User Manual
Security Option (Default: Setup)
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but to startup your PC.
APIC Mode (Default: Enabled)
This option is used to enabled or disabled APIC functionality. The available
setting values are: Disabled and Enabled.
MPS Version Control For OS (Default: 1.4)
This option is used to set up the version of MPS Table used in NT4.0 OS.
OS Select for DRAM > 64MB (Default: Non-OS2)
This item is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this item at
the default.
Report No FDD For WIN 95 (Default: No)
If you are using the Windows 95 and running a system with on floppy drive,
select ”Yes” for this item to ensure compatibility with Windows 95 logo
certification. The available setting values are: No and Yes.
Small Logo (EPA) Show (Default: Disabled)
This item allows you to enable or disable the EPA logo. The available setting
values are: Disabled and Enabled.