Foxconn 865M01-G-6ELS - Manual (Page 37)

Chapter 2 Installation Instructions
29
865M01G/PE/GV User Manual
1394 Header: 1394 HDER (Optional)
The 1394 expansion cable can be connected to either the front (provided that
the front panel of your chassis is equipped with the appropriate interface) or
real panel of the chassis.
GND
VCC
B -
GND
A -
1394 HDER
1 2
9 10
VCC
B +
GND
Empty
A +
Wake-Up On LAN: WOL
Through the Wake-Up On LAN function, a wake event occurring from the net-
work can wake up the system. To utilize this function, please be sure an ATX 12V
power supply with a 5VSB line capable of delivering a current of at least 720mA,
and a LAN adapter which supports this function. Then connect the header to the
relevant connector on the LAN adapter, set “Wake up by PCI Card” to enabled in
the “POWER MANAGEMENT SETUP” section of the CMOS SETUP. Save and
exit, then boot the operating system once to make sure this function takes effect.
5V _SB_SYS
GND
WOL
1
LAN wake up