Foxconn 865M01-G-6ELS - Manual (Page 14)

Chapter 1 Product Introduction
6
865M01G/PE/GV User Manual
ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
CPU socket
A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the intel ®
Pentium ® 4 processor (and Intel’s future Prescott CPU) Supports 800/533/
400 MHz system bus and allows up to 6.4GB/s data transfer rates.
North bridge controller
The Intel ® 865G/GV Graphics Memory Controller Hub(GMCH) and the Intel ®
865PE Memory Controller Hub(MCH) provide the processor interface with
800/533/400 MHz frequency, system memory interface at 400/333/266MHz
operation, and 1.5V AGP interface that supports AGP 3.0 specification including
8X Fast Write protocol, the GMCH provides an integrated graphics accelerator.
DDR DIMM sockets
These two 184-pin DIMM sockets support up to 2GB system memory using
unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
Super I/O
The Winbond W83627HF Low Pin Count (LPC) interface provides the
commonly used Super I/O functionality. The chip supports a high-performance
floppy disk controller for a 360k/720K/1.44M/2.88M floppy disk drive, a multi-
mode parallel port, two serial ports, the mouse and keyboard interface and
the LPC (Low Pin Count) interface.
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
1
2
3
4
5
6
7