Foxconn 865M01-G-6ELS - Manual (Page 43)

Chapter 2 Installation Instructions
35
865M01G/PE/GV User Manual
Installing an expansion card
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completelyseated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
AGP Slot (supported by 865M01G/PE motherboard only)
This motherboard has Accelerated Graphics Port (AGP) slot that only Supports 1.5V
AGP cards. When you use an AGP card, make sure that your AGP card with 1.5V
specification. Note the notches on the card Golden fingers to ensure that they fit the
AGP slot on your motherboard.
AGP slot
Warning:
The motherboard may be damaged if a 3.3V AGP card is used. Make
sure that your AGP card is 1.5V specification. Note the notches on
the card golden fingers to ensure that they fit the AGP slot on your
motherboard.