Foxconn FlamingBlade - Manual (Page 56)

49
3
oC Gear
*************OC Gear**************
► Backup Slot
We have more spaces in CMOS to allow you to store up to 8 sets of BIOS configuration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of eight storage slot area. Later, you can retrieve BIOS settings
by restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: [None]; [Slot 1 - 8].
Note: You should reset the data in slot after flashing BIOS, or there will be some unexpected
problems.
► Backup Slot Description
This item will be avaliable when “Backup Slot“ is set to [Slot 1 - 8], then you can select the
overclock setting for the current slot. Setting values are: [No Description]; [Still Tweaking];
[Max Memory]; [Max CPU]; [Max FSB]; [2d Benching]; [3d Benching]; [24/7 OverClock];
[Tweaked Stock Speed].
► Save Backup
This item allows you to save the BIOS settings. See the help string in “Item Help” table for
detail.
► Load Backup
This item allows you to restore the BIOS settings. See the help string in “Item Help” table for
detail.
► Clear Backup Slot
This item allows you to clear the BIOS settings. See the help string in “Item Help” table for
detail.
********Foxconn Function********
► Smart Boot Menu
When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform
you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is
selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
*************** CMOS Backup *************** Item Help
Backup Slot None
x Backup Slot Description No Description Menu Level ►
x Save Backup Save
x Load Backup Load Choose storage section
x Clear Backup Slot Clear 1 or 2 or 3 or 4 or 5 or
or 7 or 8 to store your
********** Foxconn Features ********** clock setting. If you store
Smart Boot Menu Disabled your setting to
Smart Power LED Enabled Current Storage Gear
Auto Detect PCI Clock Enabled successfully, then the
Spread Spectrum Disabled Storage Gear will turn to
Over Clock Recovery Disabled Green color.
If you clear the
Current Storage Gear
successful, then the
color will turn back
to normal.
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
None