Foxconn FlamingBlade - Manual (Page 10)

3
1
1-1 Product Specifications
CPU Support LGA1366 Intel® CPU:
Core TM i7 and Core TM i7 Extreme Series processors
Supports Intel® Hyper-Threading Technology
QPI Up to 6.4GT/s
Chipset North Bridge: Intel® X58 chipset
South Bridge: Intel® ICH10R(Flaming Blade)
Intel® ICH10(Flaming Blade GTI)
Memory 3 x 240-pin DDR3 DIMM sockets
Supports up to 12GB of system memory
Triple channel DDR3 1800(oc)/1600(oc)/1333/1066/800MHz
(oc*: Overclocking)
* The memory controller is integrated into the Core TM i7 CPU, overclocking
might vary from CPU to CPU. Intel officially only supports DDR3 1333
Audio Realtek ALC888 chip
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF out
Support Jack-Sensing function
LAN 2 x Realtek 8111C Gigabit LAN(Flaming Blade)
1 x Realtek 8111C Gigabit LAN(Flaming Blade GTI)
Expansion Slots 2 x PCI Express x16 slots
1 x PCI Express x1 slot(Only for Flaming Blade)
1 x PCI Express x4 slot
2 x PCI slots
Onboard Serial ATA 6 x SATA connectors
300MB/s data transfer rate
Supports hot plug and NCQ (Native Command Queuing )
Supports RAID 0, RAID 1, RAID 5, RAID 0+1(Only for Flaming Blade)
Supports Intel® Matrix Storage Technology(Only for Flaming Blade)
USB Supports 12 USB 2.0 ports (8 rear panel ports, 2 onboard USB connectors
providing 4 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
Supports hot plug
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x Front panel connector
1 x Front Audio connector
1 x CD_IN connector
1 x Speaker connector
1 x VFD connector (Only for Flaming Blade)
1 x CPU fan header (4-pin)
1 x System fan header (3-pin)