7 onboard led, 8 onboard debug led – Foxconn FlamingBlade User Manual
Page 29
22
2
Do not remove or plug in any device when the onboard LED is lighting on.
WA
RNING!
2-7 onboard leD
DRAM Power leD:
The LED lights up indicating the system is on or the
system is staying at S1 or S3 sleeping state.
+5V Standby leD:
It will light whenever the power supply that connected to
the motherboard is switched on.
DIMM3 SPD Detect leD:
The Normal status is on. When the DDR in DIMM3 is not
support SPD address in DIMM3, the LED will turn off.
22
2-8 onboard Debug leD
2-digital LED displays show the current hardware status and display Port80 and Intel MRC codes
during Bootup to enable quick and easy system debugging.
This manual is related to the following products: