Foxconn FlamingBlade - Manual (Page 53)

46
3
► CR (Command Delay)
This item allows you to select a delay time (in clock cycles) between sending the last
data from a write operation to the memory and issuing a read command.
► tRFC (Refresh Cycle Time)
This item allows you to set Row Refresh Cycle (in clock cycles).
► tWR (Write Recovery Time)
This item allows you to set Write to Precharge delay (in clock cycles).
► tWTR (Write to Read Delay)
This item allows you to set minimum Write-to-read delay (in clock cycles).
► tRRD (RAS to RAS Delay)
This item allows you to set RAS to RAS Delay (in clock cycles).
► tRTP (Read to Precharge)
This item allows you to set the read CAS to precharge time (in clock cycles).