Floppy disk drive connector : floppy1, Usb connectors : f_usb1/2, Ide connector : pide1 – Foxconn FlamingBlade User Manual
Page 23: Pin atx 12 v power connector : pwr1
16
2
Floppy Disk Drive Connector : FloPPY1
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
USB Connectors : F_USB1/2
In addition to the eight USB ports on the rear panel,
this product also provides two 10-pin USB connec-
tors on its motherboard. By connecting through USB
cables with them, user can quickly expand another
four USB ports on the front panel .
IDe Connector : PIDe1
With the provided Ultra DMA IDE ribbon cable, you
can connect to any IDE type of hard disk and CD/
DVD ROM/RW drive.
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
CA
UT
IO
N
!
8-pin ATX 12 V Power Connector : PWR1
The 8-pin ATX 12V power supply connects to PWR1 and provides power to the CPU.
Pin #
Definition
Pin #
Definition
1
GND
5
+12V
2
GND
6
+12V
3
GND
7
+12V
4
GND
8
+12V
1
4
5
8
PWR1
GND
+12V
Connect a 4-pin
power plug
NC
GND
VCC
D+
D-
D+
GND
D-
VCC
EMPTY
1 2
10
9
F_USB 1/2