Foxconn H77MXV Series - Manual (Page 48)

BIOS SETUP
41
Security
Security Configuration
Administrator Password Not Installed
User Password Not Installed
Administrator Password
HDD BootSector Write [Normal]
System Mode state Setup
Secure Boot state Disabled
Secure Boot [Enabled]
Secure Boot Mode [Standard]
Set Administrator
password.The password must
be 1 to 20 characters long.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security F-center Save&Exit
► Administrator Password
This item is used to install or change administrator password.
After you input administrator password, it then will ask you to confirm the password.
► User Password
This item is used to install or change user password.
Only when there exists a Administrator password, then this setting can be activated.
► Security option
To protect the BIOS from being changed by the unauthorized users, there is a security option
provided for your choice. Only when there exists a Administrator password, then this setting
can be activated.
[setup]:A password will be required to enter the BIOS.(Only check password when enter
setup)
[Always]:A password will be required to enter both the system and BIOS. (Always check
password)
► HDD BootSector Write
This item is used to enable or disable writes to Hard Disk Sector 0.
► Secure Boot
This item is used to enable or disable the secure boot control.
► Secure Boot Mode
This item is used to set the secure boot mode.
The detailed parameter submenus will appear when you select “Custom” Mode.