Foxconn H77MXV Series - Manual (Page 102)

RAID CONFIGURATION
95
4. Press key to select it and press , it returns to the main menu. You can see
the 74.5GB disk is offline, and actions of Recovery change from Contious Update mode to
On-Request.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
RAID Volume :
ID Name Level Stripe Size Status Bootable
0 TryRecovery Recovery(OnReq) N/A 74.5GB NeedUpdate Yes
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HDS72161 PVF904Z21G2JZM 149.0GB Recovery Disk(0)
1 ST380811AS 5PS1TAGW 74.5GB Offline Disk(0)
2 SAMSUNG HD161HJ S0V3J9APA30524 149.0GB Member Disk(0)
3 ST380815AS 5RW1CA37 74.5GB Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
4. Recovery Volume Options
6. Exit RAID BIOS
1. Take TryRAID5 as an example, select “5. Exit” in main menu and press . The screen
displays:
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume 4. Recover Volume Options
2. Delete RAID Volume 5. Acceleration Option
3. Reset Disks to Non-RAID
RAID Volume :
ID Name Level Stripe Size Status Bootable
0 TryRAID5 RAID5(Parity) 64KB 149.1GB Normal Yes
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HDS72161 PVF904Z21G2JZM 149.0GB Member Disk(0)
1 ST380811AS 5PS1TAGW 74.5GB Member Disk(0)
2 SAMSUNG HD161HJ S0V3J9APA30524 149.0GB Member Disk(0)
3 ST380815AS 5RW1CA37 74.5GB Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
6. Exit
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]
2. Press to exit Intel® Rapid Storage Technology program. The system will enter BIOS
setup.
3. Shut down the computer, remove the Non-RAID disk, and we will continue for Windows OS
installation. If you do not remove irrelevant hard disk, Windows may detect it during the
installation, and you could be confused.
4. Remove any diskette from floppy drive.
5. Restart computer to start Windows installation.