Foxconn H77MXV Series - Manual (Page 35)

BIOS SETUP
28
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some
system requirements must be met, including CPU, chipset, motherboard, BIOS and
operation system. Please refer to Intel Website for more information.
CA
UT
IO
N
►Turbo Mode
Turbo mode allows processor cores to run faster than its marked frequency in specific condi-
tion.
North Bridge Configuration
Memory Multiplier Configuration
Performance Memory Profiles [Automatic]
XMP Profile 1 Not Supported
XMP Profile 2 Not Supported
Intel Graphics Configuration
Graphics Core Ratio Limit 21
Graphics Voltage(1/256) 0
The selection of
Performance Memory
Profiles which impacts
memory sizing behavior.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security F-center Save&Exit
► Performance Memory Profiles
This item is used to select performance memory profile.
Options:[Automatic], [Manual], [XMP Profile 1], [XMP Profile 2].
[Automatic]- Configuration database of using performance memory profile.
[Manual]- Configuration database of using performance memory profile. The next submenu
will appear when select this item.
[XMP Profile 1]-Configuration database of using XMP timing profile 1.
[XMP Profile 2]- Configuration database of using XMP timing profile 2.
The following items appear only when the option is set to “Manual”.
► Memory Clock Multiplier
This item is used to set the memory clock multiplier.
► Memory Multiplier
This item is used to set the memory multiplier.
► tCL
The number of memory clocks it takes a DRAM to return data after the read CAS_L
isasserted depends on the memory clock frequency. The value that BIOS programs into the
memory controller is a function of the target clock frequency. The target clock frequency is