Foxconn H77MXV Series - Manual (Page 47)

BIOS SETUP
40
Health
Case Open Warning [Disabled]
CPU Temperature : +39 ˚C
System Temperature : +30 ˚C
CPU Fan Speed : 2428 RPM
System Fan Speed : N/A
CPUVcore : +0.948 V
VDDR : +1.572 V
+12V SYS : +11.868 V
+5V SYS : +5.125 V
VBAT : +3.024 V
CPU Warning Temperature [Disabled]
CPU Shutdown Temperature [Disabled]
CPU Smart Fan Control [Disabled]
System Smart Fan Control [Disabled]
Enabled Case Open Warning
and open chassis,
Intrusion Alarm will
appear. If don’t enter
bios setup and disabled
Case Open Warning one
time, Instrusion Alarm
don’t clear, it will
appear all the time.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security F-center Save&Exit
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Default value is [Disabled].
► System Smart Fan Control
This option is used to enable or disable system smart fan function. Default value is
[Disabled].