Foxconn H77MXV Series - Manual (Page 44)

BIOS SETUP
37
Boot
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Enabled]
Fast Boot [Enabled]
Interrupt 19 Capture [Enabled]
▶ CSM parameters
Set Boot Priorities
1st Boot [Hard Disk]
2nd Boot [Optical Disk]
3rd Boot [USB Floppy]
4th Boot [USB CD/DVD]
5th Boot [USB Hard Disk]
6th Boot [USB KEY]
7th Boot [Network]
8th Boot [UEFI]
▶ USB Key Drive BBS Priority
▶ UEFI Boot Device BBS Priority
Select the keyboard
NumLock state
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security F-center Save&Exit
► Bootup Numlock State
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
► Interrupt 19 Capture
Enable this item can allow Option ROMs to trap Interrupt 19.
► CSM parameters
Press to go to relative submenu.
► Set Boot Priorities
These items are used to set the system boot order.
► Hard Disk Drive BBS Priorities / CD/DVD ROM Drive BBS Priorities/USB Floppy Drive BBS
Priorities / USB CD/DVD ROM Drive BBS Priorities / USB HardDisk Drive BBS Priorities / USB
KEY Drive BBS Priorities / NETWORK Device BBS Priorities / UEFI Boot Drive BBS Priorities
These items appear only when the devices are available. Use this items to specify the boot
device priority sequence of the detected devices.