Foxconn H77MXV Series - Manual (Page 46)

BIOS SETUP
39
Power
ACPI Sleep State [S3]
Resume By PS2 Keyboard [Enabled]
Resume By USB Device(s) [Enabled]
Resume By PCIE Device(s) [Disabled]
Resume By Onboard LAN [Disabled]
Resume By RTC [Disabled]
Energy-using Products [Enabled]
Restore AC Power Loss [Power Off]
Select the highest ACPI
sleep state the system
will enter when the
SUSPEND button is pressed.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security F-center Save&Exit
► ACPI Sleep State
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly
return to previous state when the STR function wakes.
► Resume by PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume by USB Device(s)
This item is used to enable/disable the USB device(s) to generate a wake up.
► Resume by PCIE Device(s)
This item is used to enable or disable the PCI Express device to generate a wake up.
► Resume by Onboard LAN
This item is used to enable or disable the onboard LAN to generate a wake up.
► Resume by RTC
This item is used to enable or disable RTC alarm event to generate a wake up.
RTC is system real time clock.
► Energy-using Products
This item is used to enable or disable the EuP(Energy-using Products) feature. When en-
able, the suspend power of the chipset will be cut off in S5 suspend mode in order to reduce
the power consumption of motherboard.
Enabled: S1/S3/S4 is normal, S5 wake up only by pressing the power button.
Disabled: Normal ACPI function.
► Restore AC Power Loss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.