Foxconn Q77M - Manual (Page 92)

5
8�
Create RAID5 (Parity)
1. Select “ 1.Create RAID Volume” from the main menu and press .
2. In " Name" item, you can input a device name for the RAID5 system and press
to apply it. Here, we name it as TryRAID� to replace the default Volume0.
3. In “ RAID Level” item, you can use Up or Down arrow key to make a selection.
Select RAID�(Parity) and press .
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
Enter a unique volume name that has no special characters and is
16 characters or less.
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Volume0
RAID0(Stripe)
Select Disks
64KB
0.0 G�
N�A
Create Volume
TryRAID�
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
RAID �: Stripes data and parity.
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID�
RAID0(Stripe)
Select Disks
64KB
0.0 G�
N�A
Create Volume
RAID�(Parity)
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[ CREATE VOLUME MENU ]