Foxconn Q77M User Manual
Page 91
5
84
4. After exiting from "
RAID Level", it goes directly to "Stripe Size" item. Because all
four disks are selected for RAID10, so there is no need to go to
Disks option.
�. Use Up or Down arrow key to select the desired strip size when entering “
Strip
Size” menu. The default value is 64K.
6. In “
Capacity” item, use the default value, and press
twice the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
�. Select “
Create Volume” and press
Press
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y�N) :
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
The following are typical values:
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID10
RAID10(RAID0+1)
Select Disks
128K
149.1 GB
N�A
Create Volume
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[
HELP
]
64KB
[
CREATE VOLUME MENU
]
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Recover Volume Options
�. Exit
RAID Volume :
ID
Name
Level Stripe
Size Status �oota�le
0
TryRAID10
RAID10(0+1)
64KB 149.1GB
0
TryRAID10
RAID10(0+1) 64KB 149.1GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size Type�Status(Vol ID)
0
Hitachi HDS72161
PVF904�21G2J�M
149.0GB
Hitachi HDS72161
PVF904�21G2J�M
149.0GB
PVF904�21G2J�M
149.0GB
Mem�er Disk(0)
1
ST380811AS
5PS1TAGW
74.5GB
Mem�er Disk(0)
2
SAMSUNG HD161HJ S0V3J9APA30524
149.0GB
S0V3J9APA30524
149.0GB
149.0GB
Mem�er Disk(0)
3
ST38081�AS
�RW1CA3�
74.5GB
Mem�er Disk(0)
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[
MAIN MENU
]
1. Create RAID Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu