Foxconn Q77M - Manual (Page 17)

10
2
10
Install the CPU Cooler
Follow the steps �elow to correctly install the CPU cooler on the mother�oard.
1. Apply and spread an even thermal
grease on the surface of CPU. 2. Place the four bolts of the CPU
cooler to the holes of the mother�oard,
push them straight down from the top,
and the �olts will �e fastened on the
mother�oard. That's it.
3. Check the solder side of the
mother�oard, the push pin should �e
fixed as depicted in the picture.
3
2
1
4. Attach the 4-wire CPU cooler
connector to the CPU FAN header
on the mother�oard .
Release bolts of CPU cooler from
motherboard :
1.Turning the push pin (�olt)
along with the direction of arrow
(counterclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
Use extreme care when removing the CPU cooler �ecause the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
C
AU
TI
O
N !
3
2
1