Health – Foxconn Q77M User Manual
Page 43
3
36
Health
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main F-Center Chipset Boot Power Health Security Save & Exit
Case Open Warning
[�isabled]
CPU Temperature
: +45 C
System Temperature
: +27 C
CPU Fan Speed
: 3026 RPM
System Fan 1 Speed
: N/A
System Fan 1 Speed
: N/A
CPU Vcore
: +0.924 V
V��R
: +1.608 V
+12V SYS
: +12.074 V
+5V SYS
: +3.045 V
CPU Warning Temperature
[�isabled]
CPU Shutdowm Temperature
[�isabled]
CPU Smart Fan Control
[�isabled]
System Smart Fan Fan Control
[�isabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Enabled Case Open Warning
and open chassis,Intrusion
Alarm will appear.If don’t
enter bios setup and dis-
abled Case Open Warning one
time,Intrusion Alarm don’t
clear,it will appear all the
time.
Health
► Case Open Warning
This item is used to ena�le or disa�le case open warning function.
► CPU Temperature
These items show the current CPU temperature detected automatically �y the system.
► System Temperature
These items show the current System temperature detected automatically �y the system.
► CPU Fan Speed
This item shows the current CPU Fan speed detected automatically �y the system.
► System Fan 1/2 Speed
This item shows the current North �ridge Fan speed detected automatically �y the system.
► CPU Vcore/VDDR/+12V SYS/+5V SYS
These items show the Current CPU Vcore/VDDR/+12V SYS/+5V SYS voltage detected auto-
matically �y the system.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the mother�oard will send out warning information.
► CPU Shut Down Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU/System Smart Fan Function
This option is used to ena�le or disa�le smart fan function. Default value is [Disa�led]. Only
when this option is enabled, you can set some correlative parameters. "Smart Fan Automatic
Mode" is the principle figure of CPU smart fan function for your reference.
The CPU fan�System speed are automatically detected and displayed �y the system.