Foxconn Q77M - Manual (Page 78)

5
�1
5-2 BIOS Configuration
1. Enter the �IOS setup �y pressing key during the POST(Power On Self Test).
2.
Select the “SATA Configuration” from the “Advanced”, then set the “SATA Mode” op-
tion to [RAID Mode].
3. Press to save the setting then PC will re�oot itself.
5-3 Create RAID in BIoS
enter RAID BIoS Setup
When �IOS is restarted, it will display a message asking you to press + keys
simultaneously to enter the main menu of Intel
® Matrix Storage Manager Option ROM
Utility. Press the + to enter Configuration Utility.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
SATA Configuration
SATA Mode [RAI� Mode]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
SATA Port5 Not Present
SATA Port6 Not Present
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
(1) I�E Mode. (2) AHCI Mode.
(3) RAI� Mode.
Advanced
1. Create RAID Volume 3. Reset Disks to Non-RAID
2. Delete RAID Volume 4. Recover Volume Options
�. Exit
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model Serial # Size Type�Status(Vol ID)
0 Hitachi HDS72161 PVF904�21G2J�M 149.0GB Hitachi HDS72161 PVF904�21G2J�M 149.0GB PVF904�21G2J�M 149.0GB Non-RAID Disk
1 ST380811AS 5PS1TAGW 74.5GB Non-RAID Disk
2 SAMSUNG HD161HJ S0V3J9APA30524 149.0GB 149.0GB Non-RAID Disk
3 ST38081�AS �RW1CA3� 74.5GB Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
1. Create RAID Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu