Foxconn Q77M - Manual (Page 104)

5
9�
5-4 Install a New Windows XP
1. Press to enter �IOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the “�oot Option #1” to CD�DVD ROM, save changes and exit the �IOS setup.
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press key
immediately. If you forgot to do this, PC will go to an fatal �lue screen, and you
may need to re�oot the system again. PC may not respond to your input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
W hen you set the SATA Mode in �IOS to either AHCI or RAID, you need to
follow these steps to install your Windows XP system.
C
AU
TI
O
N
!
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Save & Exit Boot
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Enabled]
CSM16 Module Version 07.63
Boot Option Priorities
Boot Option #1 [SATA: ATAPI �V� ...]
C�/�V� ROM �rive BBS Priorities
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Set the system boot order