Foxconn B75M - Manual (Page 43)

Boot
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Enabled]
Fast Boot [Disabled]
Interrupt 19 Capture [Enabled]
▶ CSM parameters
Set Boot Priority
1st Boot [Hard Disk]
2nd Boot [CD/DVD]
3rd Boot [USB Floppy]
4th Boot [USB CD/DVD]
5th Boot [USB Hard Disk]
6th Boot [USB KEY]
7th Boot [Network]
8th Boot [UEFI]
▶ USB KEY Drive BBS Priorities
▶ UEFI Boot Drive BBS Prioriies
Select the keyboard
NumLock state
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Power Health Security f-center Save&Exit
► Bootup Numlock State
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten
thetime needed to boot the system.
► Interrupt 19 Capture
Enable this item can allow Option ROMs to trap Interrupt 19.
► Set Boot Priorities
These items are used to set the system boot order.
► Hard Disk Drive BBS Priorities / CD/DVD ROM Drive BBS Priorities/USB Floppy Drive
BBS Priorities / USB CD/DVD ROM Drive BBS Priorities / USB HardDisk Drive BBS
Priorities / USB KEY Drive BBS Priorities / NETWORK Device BBS Priorities / UEFI Boot
Drive BBS Priorities
This items appear only when the devices are available. Use this items to specify the boot
device priority sequence of the detected devices.
BIOS SETUP
36