Foxconn B75M - Manual (Page 103)

RAID CONFIGURATION
96
5-4 Install a New Windows XP
1. Press to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the first Boot device to CD/DVD, save changes and exit the BIOS setup. (Please refer
to Chapter 3 BIOS Setup)
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press key immediately.
If you forgot to do this, PC will go to an fatal blue screen, and you may need to reboot the
system again. PC may not respond to your input immediately, and it keeps loading files
until the next screen displays.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
When set the SATA Mode in BIOS to either AHCI or RAID, you need to follow the
following steps to install Windows OS.