Foxconn 720A - Manual (Page 33)

3
26
Fox Intelligent Overclock
► CPU Clock / PCIE Clock
These items allow you to select different CPU clock and PCIE clock.
► NPT FID Control (Appears only when CPU support)
This is CPU multiplier. It allows you to configure CPU's speed much easier. This option will be
displayed only if your CPU is supporting this feature.
Memory Timing Setting
► Timing Mode
This item allows you to set the memory timing mode. The available options are:
[Auto]: System will detect the timing automatically;
[MaxMemCLK]: The memory timing is limited by the memory clock value set in the next item.
► Memory Clock Value Limit
Phoenix - AwardBIOS CMOS Setup Utility
Memory Timing Setting
Timing Mode [A uto] Item Help
x Memory Clock Value Limit DDR 400
SPD Checksum Restart [Ignore] Menu Level ►
CKE Base Power Down Mode [Enabled]
CKE Base Power Down [Per Channel] Auto, no user limit
Memclock Tri-stating [Disabled] MaxMemCLK, limit by
Memory Hole Remapping [Enabled] memory clock value
Auto Optimize Bottom IO [Enabled]
x Bottom of [31:24] IO Space D0
Bottom of UMA DRAM [31:24] [FC]
Memory Timing Setting [Disabled]
x TwTr Command Delay 3 Bus Clocks
x Trfc0 for DIMM0 195ns
x Trfc1 for DIMM1 195ns
x Trfc2 for DIMM2 195ns
x Trfc3 for DIMM3 195ns
x [Twr] Write Recovery Time 6 Bus Clocks
x [Trtp] Precharge Time 3 Clocks
x [Trc] Row Cycle Time 26 Bus Clocks
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
Auto
Phoenix - AwardBIOS CMOS Setup Utility
Fox Intelligent Overclock
CPU Clock [200] Item Help
PCIE Clock [100]
NPT FID Control [Auto] Menu Level ►
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
200