Foxconn 720A - Manual (Page 102)

5
95
7. There are two drivers, all these two drivers must be installed. Press [Enter] to select
the first driver - "NVIDIA RAID Driver (required)".
8. A confirmation message appears to double check if the driver is really what we
wanted. As we need to install both two drivers, so we will press [S] again to select
the second driver. It will ask you to insert the RAID driver diskette into your floppy
drive again, press [Enter] to continue.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
NVIDIA nForce Storage Controller (required)
NVIDIA RAID Driver (required)
Windows Setup
Setup will load support for the following mass storage device(s):
NVIDIA RAID Driver (required)
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device ENTER=Continue F3=Exit