Foxconn Cinema Deluxe - Manual (Page 89)

5
82
5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing key when boot up.
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“SATA
Configuration” menu and press to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Main Menu ]
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SATA Configuration
SB710 SATA Controller [Enabled] Help Item
SB710 SATA Mode
Native IDE
RAID
AHCI
Legacy IDE
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F2/F3:Change Colors F9:Optimized Defaults
[RAID]
Options