Foxconn Cinema Deluxe - Manual (Page 29)

3
22
tion can be enabled/disabled in the next three settings.
► Keyboard
The system boot will not stop for a keyboard error if you enabled this item.
► Mouse
The system boot will not stop for a mouse error if you enabled this item.
► BIOS Information
It displays the mainboard model of this product, and the current BIOS ID/Build Date/ver-
sion. User can check this information and discuss with the field service people if a BIOS
upgrade is needed.
► Memory Information
This item displays the current memory size/memory tinings/memory clock/tCL/tRCD/tRP/tRAS.
The size is depending on how many memory modules were installed in your system before
powering on.
► tCL (CAS Latency)
The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-
ed depends on the memory clock frequency. The value that BIOS programs into the memory
controller is a function of the target clock frequency. The target clock frequency is determined
from the supported CAS latencies at given clock frequencies of each DIMM.
► tRCD (RAS-to-CAS Delay)
This item displays the delay time (in clock cycles) between the CAS# and RAS# strobe sig-
nals.
► tRP (Precharge Command Period)
This item displays the row precharge time (in clock cycles).
► tRTP (Internal Read to Precharge Command Delay)
This time displays the delay time (in clock cycles) between read command and precharge
command.
► tRAS (Active-to-Precharge Delay)
This item displays the minimum RAS# active time (in clock cycles).
► Subtimings Information
Press to go to relative submenu.
► LAN Information
This item shows the onboard LAN MAC address.