Foxconn Cinema Deluxe - Manual (Page 43)

3
36
Overclock Control Center
► Fox Intelligent Stepping/ CPU Configuration/ Memory Configuration/IGP Configuration
Press to go to its submenu.
Fox Intelligent Stepping
► CPU Multiplier
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be valid if your
CPU ratio is unlocked and will be displayed only if your CPU is supporting this feature.
If your CPU is Phenom, the setting values are: [Auto], [Manual].When you select [Manual], you
may set the value of the CPU Multiplier ID/Divider. It also displys the value of the Current Multi-
plier ID(by CPU)/Divider, the Current CPU Speed(by CPU) and the Target CPU Speed.
► Cool ’N’ Quiet (Appears only when CPU supports)
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Overclock Control Center
► Fox Intelligent Stepping [Press Enter] Help Item
► CPU Configuration [Press Enter]
► Memory Configuration [Press Enter] Configure Fox
► IGP Configuration [Press Enter] Intelligent Stepping
Function
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F2/F3:Change Colors F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Fox Intelligent Stepping
AMD CPU Overclocking Configuration Help Item
Multipliers unlocked :Yes Multiplies the
CPU Multipler (FID) [Auto] Reference Clock (FSB)
Cool ’n’ Quiet [Enabled] resulting in the CPU
CPU Voltage Offset [Auto] Core Frequency
Current CPU Voltage :1.232 V (Auto)
Target CPU Voltage :1.232 V (Auto)
Advanced Clock Calibration [Disabled]
ClockGen Configuration
Reference Clock (FSB) [200]
PCIEx16 Slot Clock [100]
CPU-NB HT Multiplier [Auto]
HT Uplink Width [Auto]
HT Downlink Width [Auto]
► Advanced HT Settings [Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F2/F3:Change Colors F9:Optimized Defaults
[Auto]