Foxconn 6100K8MA-RS User Manual
Page 40
33
Chapter 3 BIOS Description
v
First/Second/Third Boot Device
This option allows you to set the boot device sequence.
v
Boot From Other Device
With this item enabled, the system will search all other possible locations if it
fails to find one in the devices specified under the first, second and third boot
devices.
v
Swap Floppy Drive
If you have two floppy diskette drives in your system, this option allows you to
swap the assigned drive letters.
v
Boot Up Floppy Seek
If this option is enabled, BIOS will activate the floppy drive during the system
boot and the drive’s indicator will flash after the activation. The magnetic
head will move back and forth from A to B.
v
Boot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your system
is started.
v
Gate A20 Option
This option is used to set up the A20 signal control necessary for
access to the 1MB memory.
v
Typematic Rate Setting
If this option is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard.
v
Typematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down
keygenerated.
v
Typematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a
held-down key begins generating repeat characters.
PDF 文件使用 "pdfFactory" 试用版本创建