Formax FD 6100 - Manual (Page 36)

35 Using the machine
4125603C/B
10/10/2003
Changing the size:
Indicate the height of the envelope or document in millimeters
Correcting the stop position of the envelope:
You can correct the position of the envelope in order to insert
folded leaflets correctly. If the settings are incorrect, the envelope
may not be sealed correctly.
Set too high Set too low
Correcting the moistening position:
This setting makes it possible to adjust the area to be moistened
on the envelope flap. It may be necessary to adapt the moistening
to the shape of the flap or the thickness of the envelope in order to
ensure optimal adhesion.
Moistening area Moistening limit
x mm
x mm
Moistening
position