Formax FD 6100 - Manual (Page 27)

26 Using the machine
4125603C/B
10/10/2003
2.1.3 Starting a job
- Select the line "Job number", with the key.
- Choose a job number with .
- Load the appropriate trays with your documents.
- Press the
START
S T O P
key to start the cycle.
The cycle can be interrupted at any time by pressing the
START
S T O P
key again.
To test the settings quickly, press START
S T O P
twice: the
machine will perform a single cycle.
If the job selected uses the "Manual" (AutoStart)
function it is not necessary to press the START
S T O P
key.
Tray A starts automatically when inserting a
sheet of paper.
2.1.4 Modifying a job
Jobs already in the memory can be modified:
- Select the line "Job number", with the
key.
- Choose the job number to be modified with
- Make the necessary changes, including selection of
trays, document format and envelope format.
- Launch the cycle by pressing the
START
S T O P
key.
As long as the icon is flashing, the changes have not
been finalized. Press to save them to the memory.
An on-line help message is displayed on the
screen
for each job.