Formax FD 6100 User Manual
Page 20
19
Installation and start-up
4125603C/B
10/10/2003
1. Select a number between 0 and 9, using the keys .
2. Press
START
S T O P
to select the number and the cursor should move
automatically to the next position.
3. Repeat these two operations until you have finished entering
(10 digits).
4. If you make a mistake when entering your code, press
ESC
to
delete and start again from the beginning.
1.2 Installation and initial start-up
When the machine is powered up, the initialization screen will
be displayed for a few seconds. The number displayed is the
total number of cycles the machine has performed, all tasks
included.
1.3 Entering the unlocking code
This screen will automatically appear at the final step of the
installation procedure.
Enter the code number appearing in section J of your quick start-
up guide as follows:
INITIALIZATION IN PROGRESS
AUTHORIZATION CODE SET UP
: Select number
START-STOP : Validate number
ESC : exit
Press to confirm
Code : 0000000000
INITIALIZATION IN PROGRESS
INITIALIZATION IN PROGRESS
Total number of cycles : 1234567
(press ESC during
initialization to change the
machine setup)