Formax FD 6100 - Manual (Page 22)

21 Installation and start-up
4125603C/B
10/10/2003
1.5 Filling the moistening tray
The moistening tray is a device that enables the machine to
moisten the glue on the envelope flap so that it can be sealed.
This screen appears each time the machine is started up and
remains active for several seconds.
INITIALIZATION IN PROGRESS
CHECK WATER LEVEL
Refill water
1. Open the machine
Do not do this if you have already done
5. Close the machine
2. Remove carefully the
moistening tray by its blue handles.
3. Remove the strip of 3 stoppers
and fill the tank with water through
the 3 holes.Ensure the brushes
are properly impregnated with
water
4. Replace the moistening tray
in the machine, with the blue
handles towards you.
1 11 11
2 22 22
3 33 33
4 44 44
1 11 11
To fill the moistening tray