Fluke Biomedical 37-705 - Manual (Page 51)

Appendix
Error Messages
B
B-1
Appendix B
Error Messages
Checksum error 0x06FF
1.
PRESS ANY KEY TO CONTINUE…
If the above message appears, note the error code and call Fluke Biomedical Technical Support at
440.248.9300.
18 Calibration groups were
reset due to checksum errors 2.
PRESS ANY KEY TO CONTINUE…
The above message indicates that internal RAM error occurred during startup. Restart the unit to verify
reset.
RS-232 timed out
3.
PRESS ANY KEY TO CONTINUE…
The above message indicates that the communications has timed out. Verify the serial cable is secured at
both ends. Restart the unit.
Group with this
name already exists.
Please select a different name.
4.
PRESS ANY KEY TO CONTINUE…
The above message appears when the name you have entered already exists. Enter a different name
and continue.