Fluke Biomedical 37-705 User Manual
Page 27
Operation
Calibrate Modes
2
2-17
position. Enter the actual exposure or the sum of multiple exposures (up to 1000 cGy) by pressing the UP
or DOWN keypads to the right of the display to scroll through the number set. After the exposure has
been entered, press the ENTER KEY.
Calibrate Screen # 15
group
name
1 1.157
2
1043
3
1.266
4
5
SAVE CAL
FACTORS?
GROUP CHANNEL
nC/cGy
YES
No
The calibration factor for each channel (diode) is calculated and displayed. "Save calibrations factors?"
appears in the message box. To save the calibration factors, press the YES soft-key, to abort the calibra-
tion process without saving the new calibration factors press the NO soft-key.
Calibrate Screen # 16
MEASURE ADD
SELECT EDIT
SETUP DELETE
CAL
EXPOSE
REPORT
MODE OPTION
The Calibration report is used to print the report. Press the OPTION soft-key and select REPORT. Press
the ENTER key to print the report. Calibration reports for all groups will be printed.