Flowserve URB 1 - Manual (Page 62)

62
Press button once briefly to activate the
line editing mode.
In this window the following parameters can
be set:
Standard curve temperature compensation
[% / °C]
Recording/adding a temperature curve
Cell constant of the conductivity electrode
Our example shows the factory setting “00”,
which means that no standard curve has
been selected and activated.
Press button once briefly to enter the
line where you can select a standard curve.
For more information see Annex (page 77).
Press button twice briefly to select the
function NORM.
The function NORM allows the retrieval of
11 different standard curves stored in the
URB 1. The curves are applicable for different
feedwater conditioning agents with different
basic conductivities.
For more information see Annex (page 77).
Press button once briefly to activate the
line editing mode.
Basic Settings
– continued –
Adjusting NORM (standard curve) temperature compensation
– continued –
flashing
flashing
twice briefly
once briefly
once briefly
once briefly