Flowserve URB 1 - Manual (Page 55)

55
Press button once briefly to activate the line
editing mode.
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
Press button once briefly to activate the
automatic intermittent blowdown function.
Press button once briefly to enter the
window where the following parameters
can be set:
■ Frequency of the intermittent blowdown
(in hours)
■ Duration of the intermittent blowdown
(in seconds)
Press button once briefly to activate relay
contact 4 for establishing MIN alarm.
The relay contact 4 of the LRR 1-40 is
located across terminals „28“, „29“ und „30“.
Please observe the wiring diagram of the
LRR 1-40.
once briefly
once briefly
once briefly
once briefly
flashing
flashing
flashing