Flowserve URB 1 - Manual (Page 18)

18
Basic Settings
– continued –
Changing factory set node ID of the URB 1 / Adjusting & changing node ID
– continued –
Press button twice briefly to save
settings and return to the main window.
Possibilities to display bus devices
The URB 1 can display only one level monitoring device, one low-level alarm, one
high-level alarm and one conductivity monitoring device per vessel (e. g. steam
boiler or feedwater deaerator).
If the monitoring systems of more than one vessel are to be displayed, provide one
URB 1 per vessel.
Press button briefly to activate the line
selection mode.
In our example the node ID was set to
“061”.
twice briefly
briefly